When you are ready to install an epoxy garage floor, you must know the process the installers will use. This will help ensure that your garage is ready for installation and that you understand what will happen during the process.
Griffin’s Epoxy Flooring in Spokane is one of the many epoxy garage flooring services that can help bring your garage to life. Here is a quick overview of what will happen when you hire a professional installer:
1) Clean and Degrease the Floor
Garage floors are often filled with dirt, dust, and oil buildup. The epoxy garage flooring service will use a pressure washer to remove all debris from the surface and then apply a degreaser to break down any remaining oils or grease. A degreaser contains a compound that breaks down oil, grease, and other contaminants on the surface.
2) Etching Your Concrete
Etching is preparing the concrete for the epoxy to adhere correctly. It requires a strong cleaner and etching solution, which is applied to the concrete surface using a scrub brush. This process opens up the pores in your floor so that the epoxy can penetrate and bond with it more effectively. Experts like Griffin’s Epoxy Flooring in Spokane offer excellent etching services to ensure that your garage floor is ready for the epoxy.
3) Primer Application
Primer is critical to ensure that the epoxy adheres to the surface properly. Priming helps to create a strong bond between the epoxy and the garage floor so that it can last for years. The primer also provides an additional layer of protection against oils and other substances which may come into contact with your newly installed epoxy.
4) Mixing the Epoxy
An epoxy garage flooring service uses a two-part epoxy that needs to be mixed before application. This mixing process is critical as it ensures the epoxy will adhere adequately and have the strength and durability needed for your garage space. Once mixed, most epoxies should be applied within about four hours, so it’s essential to begin application quickly after mixing.
5) Applying the Epoxy
Once mixed, installers will use a roller and brush to apply the epoxy to your garage floor. When applying, it’s essential to start at one corner of your garage and work in small sections until the entire floor is covered. As you work, be sure to use enough epoxy for complete coverage and try to avoid overlapping strokes.
6) Sealing the Epoxy
The final step is sealing the epoxy with a clear coat. This sealant provides an additional layer of protection for your floor and helps to enhance its appearance by creating a glossy finish. Most installers will use a roller, brush, or squeegee to apply the sealant evenly, covering any small cracks or imperfections that may have been missed during the previous steps. Once the sealant has been applied, give it enough time to dry before walking on it or exposing it to any liquids.
Read More:- Epoxy Flooring Service in Spokane.
True Cost of Basement Epoxy Flooring
Epoxy garage floors are an investment that can truly transform the look of your space, but it is essential to care for them to maintain their condition correctly. Regular cleaning with a mild detergent and warm water will help keep your floor looking new. Using floor mats or runners to protect your floor from heavy objects dragged across it is also a good idea. Lastly, always use a spill guard when spilling liquids on the floor to avoid staining or damage. With the proper care, an epoxy garage floor can last many years.
Contact Griffin’s Epoxy Flooring in Spokane for the best epoxy garage flooring service. We use the best products and techniques to ensure your satisfaction with the result